HOME
Water Treatment main page

Evaporator Coil Cleaner Get the Evaporator Coil Cleaner(Adobe PDF) Product Description and Applications Evaporator Coil Cleaner is a special blend of effective ingredients designed to penetrate and remove built-up grease, dirt and oxidation from finned coils, cleaning in one step. Evaporator Coil Cleaner does not contain acid. Product Benefits Economical - mix one part Evaporator Coil Cleaner to four parts water. Safer than acid cleaners. Cleans coils in one step - no rinsing needed. High foaming for faster penetration. Product Specifications Color Greenish-yellow Specific Gravity  0.990-1.000 pH 10.3-10.5 Odor Lemon scent Solubility in Water Complete Proper Use for Health and Safety Use Instructions: 1. Protect eyes and skin with appropriate safety items. 2. May be used with unit on or off. 3. Use low pressure spraying tank. 4. Mix one part Evaporator Coil Cleaner to 4 parts water. 5. Spray Evaporator Coil Cleaner solution into coils and allow approximately a 10-minute contact time for best results. Condensate will rinse coils. Rinse filters with clean water. Caution: Avoid contact with eyes, skin and clothing. This product contains organic cleaners and inorganic dispersants. Wear goggles and protective clothing. Do not breathe mist. For external contact, flush with water for 10 minutes. If taken internally, drink large amounts of water, followed with milk of magnesia, beaten eggs, or vegetable oil. Call a physician immediately. KEEP OUT OF THE REACH OF CHILDREN. Ordering Information:  Product Code: Evaporator Coil Cleaner  Quantity options (US) 5 gal. Pail, 55 gal. Drum, 265 gal. Tote, Bulk  Quantity options (outside US) 205 L Drum, 1000 L Tote, Bulk  Dye No  Dye Options (Color) Not applicable Quality Control To ensure quality control and assurance, all blending is controlled under ISO 9002 standards. Each individual batch is rigorously tested for conformance with product and industry specifications prior to storage, packaging, or shipment. This laboratory analysis is thoroughly conducted by Additives Inc. A Certificate of Analysis for each lot is produced and is available to customers. Technical Support It is always necessary to confirm that your products meet the required specifications. Additives Inc.'s laboratory and chemists are available to test products containing Additives Inc.'s Add Paks as a complimentary service. In this way, Additives Inc. can help you to establish or confirm your quality control and assurance program. However, we will not warranty any Additives Inc.'s product if the blending procedure is not properly followed and/or if the glycol being used contains impurities that do not allow the final product to meet the minimum ASTM standards.

Additives Inc. 5915 N. Broadway Denver, CO 80216 USA Tel: (303) 292-0595 Fax: (303) 292-0429 info@additivesinc.com ©2001, 2002 Additives Inc.