 |
 |
|
HOME
Heat Transfer Fluid main page
HTF-EG-1 and 2
Inhibited Ethylene Glycol Heat Transfer FluidsHTF-EG-1 and HTF-EG-2
(Adobe PDF)
Product Description and Applications
This ethylene glycol-based heat transfer fluid, HTF-EG, provides dependable, and superior, corrosion-inhibiting properties for use under the most demanding industrial conditions. HTF-EG is appropriate for use in systems containing steel, solder, cast iron, brass, and aluminum, and is compatible with most types of plastic piping. EG-1 performs well in the temperature range between -60ºF and 250ºF. EG-2 works between -60ºF and 350ºF.
Additives Inc. provides complimentary start-up and maintenance, fluid analysis to assist you with most effective use of this formulation in your specific system; and to monitor the continuing strength and balance of the inhibitor package. HTF-EG is compatible with most ethylene glycol-based heat transfer fluids on the market.
Product Specifications
PROPERTY HTF-EG-1 HTF-EG-2 Appearance Water white or choice of dye Ethylene Glycol (wt %) 95.4 min. 92.4 min. Inhibitors and Water (wt %) 4.6 max. 7.6 max. Specific Gravity (60ºF) 1.125-1.135 1.135-1.145 pH of solution (50% glycol) 9.5-11.0 9.5-11.0 Reserve Alkalinity (ml) 15 ml min 15 ml min Operating Range -60ºF to 250ºF -60ºF to 350ºF Use Instructions
See Additives Inc. Heat Transfer Fluid Technical Manual.
Ordering Information:
Product Code: HTF-EG-1 or HTF-EG-2 Quantity options (US) 5 gal. Pail, 55 gal. Drum, 265 gal. Tote, Bulk Quantity options (outside US) 205 L Drum, 1000 L Tote, Bulk Dye Yes Dye Options (Color) Standard Dark Green (OEM Green), Bright Grass Green, Fluorescent Green, Custom Order. Quality Control
To ensure quality control and assurance, all blending is controlled under ISO 9002 standards. Each individual batch rigorously tested for conformance with product and industry specifications prior to storage, packaging, or shipment. This laboratory analysis is thoroughly conducted by Additives Inc. A Certificate of Analysis for each lot is produced and is available to customers.
Technical Support
It is always necessary to confirm that your products meet the required specifications. Additives Inc.'s laboratory and chemists are available to test any antifreeze products containing Additives Inc.'s Add Pak as a complimentary service. In this way, Additives Inc. can help you to establish or confirm your quality control and assurance program. However, we will not warranty any Additives Inc.'s product if the blending procedure is not properly followed and/or if the glycol being used contains impurities that do not allow the final product to meet the minimum ASTM standards.
Guarantee - Warranty
Additives Inc. will only warranty our products if instructions and outlined procedures are followed. It is always necessary to confirm that your product meets the required specifications using the ASTM recognized tests and standards. Should you have a problem meeting your required specifications, Additives Inc. technical personnel will test your glycol, while you establish use levels of our products.
|
5915 N. Broadway Denver, CO 80216 USA Tel: (303) 292-0595 Fax: (303) 292-0429 info@additivesinc.com |
