 |
 |
|
HOME
Heat Transfer Fluids main page
HITEMP-100
Inhibited and Stabilized High-Temperature Alkylate-Based Heat Transfer FluidProduct Description and Applications
HITEMP-100 is a mixture of linear alkybenzenes in the C10 - C16 range containing a high-temperature corrosion inhibition and thermal stabilization package. The proprietary additive system was developed by Additives Inc., which specializes in anti-corrosion and stabilization systems for automotive antifreeze, HVAC heat transfer fluids, industrial thermal fluids, and heavy-duty engine lubricating oils.
Inhibited/stabilized HITEMP-100 possesses excellent heat transfer characteristics, with a high specific heat and thermal conductivity. With its high flash and boiling points and low pour point, it may be used in continuous operation over a temperature range of 0º F to 600º F. HITEMP-100 functions efficiently at atmospheric and low pressures, eliminating the need for high pressures to obtain uniform process heat transfer.
HITEMP-100 has a high level of resistance to thermal and oxidative degradation, minimizing fouling and sludging and providing a fluid life of many years under normal operating conditions. It is clearly superior to heat transfer oils (mineral oils) in this respect. Additives Inc.'s outstanding inhibitor package provides outstanding corrosion protection to all metals commonly used in process heating/cooling systems.
HITEMP-100 is typically used in high-temperature process systems in which both heating and cooling are required. It is used in chemical processing equipment, asphalt heating operations, rubber and plastics die and mold operations, refinery heat transfer systems, laminating and calendering rolls, drying ovens, zinc and aluminum die-casting, etc.
Product Specifications
Appearance Light, clear to cloudy yellow to amber liquid Specific Gravity (60°F) 0.088-0.091 Refractive Index (25°F) 1.510 Viscosity (100°F) 25cst Pour Point -40°F Flash Point 375°F Boiling Range
Initial
90%
568°F
733°FNeutralization Number (Mg Koh/Gram) 0.06 Water (Ppm) 155 Coefficient of Thermal
Expansion at 200°C0.000605 Heat Capacity 100°F
500°F
0.511 Btu/lb°F
0.690 Btu/lb°FpH 7.5-8.5
Ordering Information:
Product Code: HITEMP-100 Quantity options (US) 5 gal. Pail, 55 gal. Drum, 265 gal. Tote, Bulk Quantity options (outside US) 205 L Drum, 1000 L Tote, Bulk Dye Yes Dye Options (Color) Standard Dark Green (OEM Green), Bright Grass Green, Fluorescent Green, Custom Order. Quality Control
To ensure quality control and assurance, all blending is controlled under ISO 9002 standards. Each individual batch rigorously tested for conformance with product and industry specifications prior to storage, packaging, or shipment. This laboratory analysis is thoroughly conducted by Additives Inc. A Certificate of Analysis for each lot is produced and is available to customers.
Technical Support
It is always necessary to confirm that your products meet the required specifications. Additives Inc.'s laboratory and chemists are available to test any antifreeze products containing Additives Inc.'s Add Pak as a complimentary service. In this way, Additives Inc. can help you to establish or confirm your quality control and assurance program. However, we will not warranty any Additives Inc.'s product if the blending procedure is not properly followed and/or if the glycol being used contains impurities that do not allow the final product to meet the minimum ASTM standards.
Guarantee - Warranty
Additives Inc. will only warranty our products if instructions and outlined procedures are followed. It is always necessary to confirm that your product meets the required specifications using the ASTM recognized tests and standards. Should you have a problem meeting your required specifications, Additives Inc. technical personnel will test your glycol, while you establish use levels of our products.
|
5915 N. Broadway Denver, CO 80216 USA Tel: (303) 292-0595 Fax: (303) 292-0429 info@additivesinc.com |
(Adobe PDF)