|
|
|
GAS PATCH PRODUCTS

Click
on a link below for a complete product bulletin and MSDS
|
Product Code
|
Description
|
| DLBH-500 |
A two-part
universal inhibitor system made for both virgin glycol and high quality
reprocessed glycol. Allowing for greater flexibility in the adjustment
of pH, reserve alkalinity, and antifoam, this two-part system is a
non-silicate, non-phosphate, non-nitrate inhibitor package. |

Quality
Control
To ensure quality
control and assurance, all blending is controlled under ISO 9002 standards.
Each individual batch of Add Pak is then rigorously tested for conformance
with product and industry specifications prior to storage, packaging,
or shipment. This laboratory analysis is thoroughly conducted by both
Additives Inc. and SouthWest Engineers. A Certificate of Analysis
for each lot is produced and available to customers.
Technical
Support
It is always
necessary to confirm that your products meet the required specifications.
Additives Inc.s laboratory and chemists are available to test any
antifreeze products containing Additives Inc.s Add Pak as a complimentary
service. In this way, Additives Inc. can help you to establish or confirm
your quality control and assurance program. However, we will not warrant
any Additives Inc. product if the blending procedure is not properly followed
and/or if the glycol being used contains impurities that do not allow
the final product to meet the minimum ASTM standards.
Guarantee - Warranty
Additives Inc. will only warranty
our products if instructions and outlined procedures are followed. We
will not warranty the Add Paks if the depleted antifreeze that is being
recycled contains impurities that do not allow the recycled antifreeze
to meet minimum ASTM standards. It is
always necessary to confirm that your product meets the required specifications
using the ASTM recognized tests and standards. Should you have a problem
meeting your required specifications, Additives Inc. technical
personnel will test your reprocessed and
reconstituted antifreeze, while you establish use levels of our products.
(TOP)
|